LED: Philips LUXEON Rebel (Typical CRI 85, color temperature 4000K)
User Selectable Levels: 3 main levels (High, Medium and Low). Each main
level can be configured to one of its two sub-levels. The second sub-level of
the High can be further configured to different brightness levels or
strobes.
Light output are out the front (OTF) values. Runtime tests
are done using Sanyo 2000mAh Eneloop AA batteries.
130, 80, 29, 14 and 2.8 Lumen output levels are current regulated. 63 and
0.3 Lumen output levels are PWM generated.
Operating Voltage Range: 0.7V - 2.5V
Battery: One 1.5V AA (NiMH, lithium or alkaline). 14500 Li-ion batteries
are not supported. Batteries are not included in the package.
Parasitic Drain: Negligible (equivalent to 16 years)
Beam Type
80° spill beam spread
11° (3.8 feet at 20 feet) hot spot
Dimensions
Diameter: 0.85 inch (22 mm)
Length: 3.15 inch (80
mm)
Weight
1.3 oz (36.5 gram) with clip,
without battery or headband
Features
Electronic soft-touch switch, with a 200,000 cycle operating life
Smart user interface provides fast and easy access to all brightness levels
Precision machined unibody casing from premium grade Alcoa aluminum bar
stock
Proprietary heat sinking design bonds the LED board directly to the unibody
aluminum casing, providing unblocked thermal paths to over 94% of the surface
area.
Durable natural hard anodized finish (Type III Class I)
Ultra clear lens with anti-reflection coatings on both sides
Bezel down clip (pre-installed)
Orange peel textured reflector
Anti-roll and tail-standing capable
Battery power can be locked out by slightly unscrewing the tailcap to
prevent unwanted activations or parasitic drain
