|
|
|
ZEBRALIGHT ゼブラライト H32w CR123 Headlamp Neutral White 【Cree XM-L2 Neutral White (Nominal CCT 4400K) 昼白色LED 搭載 / 明るさMAX:446ルーメン / CR123×1本】コンパクトライト |
|
|
|
|
|
商品説明 |
|
|
ZEBRALIGHT H32w CR123 Headlamp Neutral White
【Cree XM-L2 Neutral White (Nominal CCT 4400K) 搭載】 |
|
|
|
Cree XM-L2 Neutral White (Nominal CCT 4400K) 昼白色LED
搭載
CR123×1本使用 ※電池は、別売りです。
サイズ : 全長約68.6mm×径約22.8mm
重量 : 約33g
【操作法】 点灯‐消灯‐調光は、頭頂部のプッシュ・ボタン操作
付属品 : クリップ、ヘッドバンド、スペアOリング |
|
Main Features and
Specifications |
|
|
LED: Cree XM-L2 Neutral White (Nominal CCT 4400K)
・User Selectable
Levels: 3 main levels (High, Medium and Low). Each main level can be programmed
to one of its two sub-levels. The second sub-level of the each main levels can
be further programmed to different brightness levels.
・Light Output
(runtimes) High: H1 446 Lm (PID, approx 1.4 hr) or H2 245 Lm (1.6 hrs) / 100
Lm (4.1 hrs) Medium: M1 50 Lm (11 hrs) or M2 22 Lm (26 hrs) / 8.5 Lm (70 hrs)
Low: L1 2.5 Lm (8 days) or L2 0.37 Lm (38 days) / 0.05 Lm (2.5 months) /
0.01 Lm (3 months)
・Beacon Strobe Mode: 0.2Hz Beacon at Low / 0.2Hz
Beacon at H1 / 4Hz Strobe at H1 / 19Hz Strobe at H1
Light output are ANSI
out the front (OTF) values. Runtimes tested (and parasitic drain estimated)
using Panasonic CR123A batteries.
・Operating Voltage Range: 2.7V -
4.2V
・Battery: One CR123A or 3.6/3.7V 16340 li-ion rechargeable.
Batteries are not included in the box.
・Parasitic Drain: Negligible (much
less than the self discharging of a battery)
・Beam Type 80 degree
spill 12 degree hot spot
・Dimensions Head Diameter: 0.9 inch (22.8
mm) Length: 2.7 inch (68.6 mm)
・Weight 1.16 oz (33 gram)
【Features】 ■PID thermal regulated output at the H1
level ■Battery capacity indicator (LED flashes 1-4 times, 4 short clicks to
start) ■Automatic stepping down from High to Medium, and from Medium to Low
when battery capacity is low ■Builtin over-discharging protection ■Durable
electronic soft-touch switch ■Smart user interface provides fast and easy
access to all brightness levels and beacon-strobes. ■Precision machined
unibody casing from premium grade aluminum bar stocks ■Proprietary heat
sinking design bonds the LED board directly to the unibody aluminum
casing ■Durable natural hard anodized finish (Type III Class I) ■Sealed
and potted LED driver circuitry ■Battery reverse polarity
protection ■Tempered optical grade glass ■Orange peel textured
reflector ■Waterproof to IPX7 (2 meters, 30
minutes)
【Operations】 This light has 3 main levels (High,
Medium, and Low) and a beacon-strobe mode. Each main level can be programmed to
one of its two sub-levels. The second sub-level of each main levels can be
further programmed to different brightness levels.
Basic Operation One
short-click turns on the light to High or turns off the light. Two
short-click turns on the light to Medium. Three short-click turns on the
light to the beacon-strobe mode. Press and hold (for over 0.6 seconds) turns
on the light to Low and then Med
|
|